Livebib
Menu

It starts by itself at the gun

On race morning you have enough to think about. Your broadcast can go live by itself at the start time, and end by itself once you are over the line.

Create a broadcast ↗Step by step in the help center

How it works

  1. Switch it on

    In the Livebib app, choose your broadcast and turn on “Start by itself at the start time”. Allow location all the time, and notifications.

  2. Get a reminder the evening before

    If it is not on yet, a notification comes around 18:00 the evening before, and one more on race morning. Tap it to switch it on.

  3. Race, and nothing else

    About 15 minutes before, the phone gets the GPS ready. At the start time you go live. Ten minutes after you cross the finish line, the broadcast ends by itself.

Good to know

  • For a race, the start time is the gun of your wave, and your race time counts from it.
  • If Livebib hears nothing from your phone for five minutes while you are live, it tells you, so you can get it going again.
  • It starts wherever the phone is. Starting from home? Set up a privacy zone around it first.

Questions

What if I change my mind?

Tap Cancel in the notification before the start, or “Cancel automatic start” in the app. The broadcast does not start.

What if no finish is recorded?

Then it ends an hour after the race’s time limit, once you have stopped moving. Your phone stops sending and tells you.

More features

← All features